AL-168 signal strain gauge Amplifier is load cell amplifier, used to connect with strain gauge load cells, such as s type load cell, s beam load cell, tension load cell, button load cell, torque load cell... etc.
The Amplifier output is 0 ~ ±10V. Zero offset range is ±0.25mV/V. Nonlinearity accuracy is ± 0.02% of Full Scale.
Strain gauge type transducer
DC2.5V, DC5V, DC10V (within 30mA)
Zero adjust range
Type L : output 10V for input 1.00mV/V~5.00mV/V
Type M : output 10V for input 0.50mV/V~2.50mV/V
Type H : output 10V for input 0.35mV/V~0.70mV/V
0.25mV/V, 0.5mV/V, 1mV/V(accuracy within ± 2%)
7.62mm pitch, M3 × L6, + head screw
Vessel type low bus. Filter
2Hz(-3db) 10Hz(-3db) 100Hz(-3db) 1kHz(-3db)
Within 0.02% F.S.
Influenced by temp. variation
Movement of zero point
Within 1 μ V/℃(input conversion)
Used in temperature
-10 ~ 60℃
Electric power source
AC100V ± 10%, 50/60Hz, about 5VA
(AC 220V is available)
44W × 92H × 110D without jutty
The purpose of Slider Kit is to gather common slideshow-like jQuery functionalities (such as news sliders, photos galleries/sliders, carousels, tabs menus)
When tracking mouse movement, you usually need to know the actual position of the mouse pointer. The event object that is passed to the handler contains some information about the mouse coordinates.