Handy Digital Force Gauge
Force gauge is also called push pull gauge, adopt strain gague type load cell, digital gauge can do the pull test, measuring force, a force mesurement device.
Electronic digital force gauge can measure the force on compression and tension.
Widely used on connector insertion and other forces, such as, fracture, bend, peeling off, breakage, hardness, elasticity and so on.
The unit display is available for N, kgf, g. & lb. Variety capacity is opened for option.
1.STATISICAL PROCESSING & PRINTING OF INSPECTION REPORT
Initial input of the tolerance limit (upper/lower) enables the device to judge the measured result as GO/NO.
Measured results will be automatically memorized up to 256 measurements.
4.HIGH ACCURACY, HIGH RESOLUTION
Initial setting on the device is possible for measurement of peak force, insertion/withdraw force, insertion compression peak force, withdraw extension peak force and holding force at contact point.
It is possible to convert the graduations of N, kgf(gf) or lbf on the device.
7.PEAK HOLD FUNCTION
9.AUTOMATIC POWER OFF
10.LOCAL NEWTON VALUE INPUT
11.RS232C SETTING FUNCTION
Various options are offered for outputs; CENTRONICE output, RS-232C output, analog output, digimatic output and switch output.
N, Kgf, (gf), lbf
10~320HZ, 6 Steps
4DIGIT LCD DISPLAY
MAXIMUM VALUE•MOMENT VALUE
640 TIMES PER SEC.
150% (ALARM BUZZER AT 105%)
A/D CONVERTER 16bit
(FULL CHARGED AT 25℃)
A/C ADAPTOR FOR CHARGING (110V,220V)
ATTACHMENT, A/C ADAPTER, CABLES, CASE
STANDARDANALOG OUTPUT ±2V F.S.
OPTIONALPRINTER CONNECTING, DIGIMATIC OUTPUT,
CENTRONICS INTERFACE. COMPARATOR CONNECTING,
When display value is bigger than 999 on HF-1, HF-10, and HF-100, the 1000th digit will exchange between 1 and 0. It means the 1000th digit display value is 10000.
HF for pull&push experiment
The purpose of Slider Kit is to gather common slideshow-like jQuery functionalities (such as news sliders, photos galleries/sliders, carousels, tabs menus)
When tracking mouse movement, you usually need to know the actual position of the mouse pointer. The event object that is passed to the handler contains some information about the mouse coordinates.